 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My furnace quits blowing and keeps turning on and won't blow
My furnace continues to try and turn on (the pilot light continues to fire but it doesn't blow but every now and then) why won't my furnace continue to blow and why does it continue to try and come on??
|
||||
Check out some similar questions!
Occasionally, my furnace ignites for a few seconds then goes out. A few seconds later it ignites again then goes out and doesn't try to ignite again. During this the little blower is going and the igniter is glowing until after the second attempt. All burners ignite each time. Sometimes the...
I have a Heil gas furnace that just started acting up today the coldest day of the year here, go figure... The pilot will light the burner and it will burn for a few seconds, but the main blower won't kick on. The burner then goes out. The draft fan runs fine. If I set the Thermostat to FAN...
What is this error code about? It says "Pressure draft safeguard auxiliary limit (when used) OR blocked vent shut off (when used). Switch did not close or re-open. Does anyone know what needs done to correct this? Thank you
Goodman 6ple24-1a unit makes ticking noise and no air is coming out, help!
I have a concord 80 plus furnace. Its less then 2 years old. It will not blow hot air, and the motor just runs and will not shut off no matter what the therm is set at. The LED flashes 4 times which says "open limit switch or limit switch circuit". I pulled the limit switch out (at least I think...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
