 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
OK so I'm looking for some help as to what I may be doing wrong here. I marked all the wires before I removed the old wall mount. Once I removed the old wall mount I found another wire in the wall that seems to serve no purpose. The wires on the old thermostat were very simple. W_G_R_O_Y... and...
I have a Carrier heat pump 2 years old and the AC etc. won't come on... The thermostat shows temps and when you put it on cool etc. nothing happens... I tried to see if the fan setting would work but it doesn't... I've also tried the heat, Eheat and Auto settings... The thermostat says each is on...
Hi All: I have Bryant plus 90 gas furnace and used to have Lenox Mercury thermostat. Heat will kick in for 15~20min after every one hour. Does not follow thermostat. So just change a new Honeywell programmable thermostat, but it is still doing the same. At the furnace LED indicator blinking 3...
I have my switchover set at 15 degrees but when it gets colder than 30 a lot of time my heat pump will run a few minutes. Then it will kick off and my auxiliary heat takes over. I would like my heat pump to run longer
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
