Ask Experts Questions for FREE Help !
Ask
    Int3rupt's Avatar
    Int3rupt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 13, 2010, 05:38 PM
    250 outlet but need it to be 220
    I have a 250 outlet but need it to be able to support 220 plug for a horse treadmill. Any help?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jan 13, 2010, 06:11 PM

    250V is the rating of the plug. It's good to 250 V. Your service is typically 208 or 240 if in the US.

    220 is dead in the US.

    Here is a list of common plug configurations typically called NEMA XX-XX

    NEMA Configurations

    The required circuit (amperage, wiresize, breaker) defines the outlet.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Change 220 outlet to 120 outlet [ 2 Answers ]

I have removed an old AC unit that ran off 220v and replaced it with a new unit that is 120v. It is #10 wire with black, white and bare copper. It used to be a feed to an old hot tub but when the last AC unit was installed they just used the circuit for that. When installing the new plug can I just...

How do I know if I have a 220 outlet [ 2 Answers ]

I am a new homeowner and learning things on my own. I have an old gas stove and am in the market for a new electric stove. How can I tell if I have a 220 outlet behing my gas stove. I've been told that some homes are prepped for both. There is a three pronged pulg from the current gas stove to...

110 outlet to 220? [ 4 Answers ]

Hi all... well I just moved into a new house... come to find out the laundry room only has standard 110 outlets and a gas 'connector'. Problem is my 5 month old dryer has the 4 prong 220v plug. I am trying to see what is involved in getting it rewired for a 220v outlet. Does it need to have all new...

Switch a 220 v outlet to a 120 v outlet [ 1 Answers ]

I just got an emergency generator and it has a 220 v plug, I will not be using a 220 appliance and would like additional 120 outlets. It seems that I should be able to split the 220 into two 120 outlets. If so how to do it.

220 outlet in my garage [ 3 Answers ]

I hope this helps, the breaker is a double 40 it has 4 wires 3 of which are about 3/8 inch in diameter or so ,sorry unsure what gauge. And the bare ground wire. Note: nothing else on that breaker. The outlet is a 30 amp 125/250 volt4 hole. Again I would like to change this to a 3 wire plug to...

View more questions Search