 |
|
|
 |
New Member
|
|
Jan 11, 2010, 10:08 AM
|
|
New home walls sweating?
Hello
My Husband and myself Live in Mi We are in the progress of building our own home.we are living in it.The outside has sheeting and tyveck no siding yet.floors have sheeting not the finished floor yet.Walls are completed, some sheet rock some togue and groove.the inside of the walls we insulated then put plasic,then the sheeting.We are seeing on a couple of the outside walls mold on the bottom of the walls were I had some cabinet doors leaning and we are seeing some water on the remaining plastic that is hanging out of the wall.only on the outside walls.could this be a condinsation problem from not having the siding on and having heat in the house.any info would be much appreciated.we are worried it will start rotting the floor or walls.
Thank you!
Sue In Michigan.
|
|
 |
Home Repair & Remodeling Expert
|
|
Jan 11, 2010, 05:18 PM
|
|
Get a sling hygrometer and test your relative indoor humidity before we start doing anything to your home. Siding provides very little R valve, primarily gets water to sheet off the house and makes the house look good. What are the outside temps, inside temps and check that RH with a sling
|
|
 |
New Member
|
|
Jan 12, 2010, 06:45 AM
|
|
 Originally Posted by ballengerb1
Get a sling hygrometer and test your relative indoor humidity before we start doing anything to your home. Siding provides very little R valve, primarily gets water to sheet off the house and makes the house look good. What are the outside temps, inside temps and check that RH with a sling
Hi
Thank you for getting back to me.When you said humidity in house that opened some eyes.we have an indoor water garden aprox 250 gal.We have very good windows in our new home and we have also noticed them having lots of condinsation on the inside of them.and the window sills getting wet.We started using our ceiling fans, We have High open ceilings.all tongue and groove it seems the fans are helping the windows.. I will get a tester.
Thank you!
Sue
|
|
 |
Home Repair & Remodeling Expert
|
|
Jan 12, 2010, 06:09 PM
|
|
Buy a sling hygrometer if you can but a plan hygrometer can fairly accurately measure humidity which I think you will find to be too high. Condenstaion on the inside of any surface means one of two things, maybe bot; you have bad insulation or your humidity is too high.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
How can I stop sweating wall in mobile home
[ 1 Answers ]
Hello from spanky third, I am cleaning a doublewide mobile home that my tenants left pretty dirty. I noticed that the walls and even over the doorways are sweating pretty bad. I do not have any vents on the roof and the ones around the roof eaves are fake. The area that is sweating is the living...
Ceiling is crying. Walls are sweating.
[ 4 Answers ]
We have recently discovered mold in rental property. Landlord wants to "patch" and "paint" over problem areas... we believe this will only cause more problems in the future. As a tenant, what kind of rights do we have to have the matter taken care of properly?
Squirrel in ceiling and walls of my mobile home
[ 3 Answers ]
:eek: I have squirels in my ceiling and walls of my mobile home
I hear them at night. They make a lot of noise gnawing. They run back and forth in the ceiling. I am so afraid that they are going to cause a fire. I read a lot of posts and the answers aren't really specific to my problem. How...
Older home, ceilings and walls covered
[ 3 Answers ]
Hello
We're looking at an old 3 level (walk up attic) Victorian, early 1900s. Structurally, it appears to be sound, solid foundation, straight lines, etc - however, most of the walls in the house have floor to ceiling wood paneling (nice looking wood, not 70's style!) which appears to have been...
View more questions
Search
|