Ask Experts Questions for FREE Help !
Ask
    Longhorn76's Avatar
    Longhorn76 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 11, 2010, 07:35 PM
    Are float switches necessary on furnace systems?
    A recommendation has been made that I "need" a float switch installed on my electric furnace upstairs. Problems could result from water collecting/overflowing in the drain pan. Is this switch really necessary?. seems new systems would come with this installed already. Would suspect that the float switches and any related electronic add-ons would also be subject to failure and would compound the risk already present. Appreciate your response in advance.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 11, 2010, 08:14 PM
    Yes in many areas of the country an additional overflow drain is also necessary besides the float switch. Why would anyone in there right mind worry about a cheap float switch when possible 100's or 1000's of dollars worth of damage can be done by a overflow of condensate.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #3

    Jan 11, 2010, 08:17 PM

    This is a longshot but I will ask if you have a condensate pump by the furnace that pumps away the condensate in the summer? If so it has a float switch in it but that should only affect your air conditioning and not the furnace.

    I have not heard of a float switch in nay electric furnace, so if you get an answer to your question I will be interested in that also.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #4

    Jan 11, 2010, 09:59 PM

    hvac1000's post is right on. AC units and heat pumps create water. Attic installed systems usually get a second drain pan and a switch.

    This one is typical. ComfortGurus.com: Diversitech Wagner WS-1 - Wet Switch Flood Detector It's not a float switch.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #5

    Jan 12, 2010, 07:45 PM

    Where I live we use the double pan system but we do not us a pump only a second drain that runs to some obvious place so that you will see the wet spot if water happens to come out of it. That way you know that you first drain pan is stopped up.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #6

    Jan 12, 2010, 08:06 PM
    Different areas different rules
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #7

    Jan 12, 2010, 08:11 PM

    A pump sometimes isn't necessary, but the second drain pain+switch saves a lot of costly repairs.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace limit switches where to find them? [ 7 Answers ]

I understand that for my code 13 and 33 fault I can try to take the limit switch out and try to tap it out of the stuck poss. I just I'm not sure where the switches are.

Coleman Electric Furnace - Limit Switches ? [ 11 Answers ]

I have a Coleman 3300L823 (23Kw /78,000 BTU) furnace with 4 elements stacked vertically (bottom-up 1, 2, 3, 4) in the heater box above the blower . Sequencers are working correctly. The elements are all in good shape. However, when the weather gets around 0 degrees F, the furnace has a hard...

Summer/Winter Furnace Switches [ 1 Answers ]

Hello, I have a older model Bryant furnace which has a switch box attached to it that has 2 switches, one that says "Summer only" and another "Winter only". Currently these switches are both at the "on" position. I have alreasy started my furnace for the winter and the furnace works when called...

Comparison of Lenox systems to other systems [ 1 Answers ]

I recently won a drawing for a free $9,000.00 heating and cooling system from Lennox. We thought is was free,but apparently, that did not include tha install price. We were given a range of 3500.00-4000.00 to complete the install? Is this the common rate for any installation ? Thanks benita13


View more questions Search