Ask Experts Questions for FREE Help !
Ask
    floridafan's Avatar
    floridafan Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 11, 2010, 06:18 PM
    P 741 faucet
    I have a Moen kitchen faucet with one arm and it has a part that is clearly not functioning correctly as it sprays water out the side like it is sprinkling rain. It is the filter part on the wand. It screws out and says KK (with a square around that) P 741, a vertical line, A NF (with a circle around the NF,) N-type symbol, AIRFORCE. Can that part be replaced by itself or will I have to replace the entire wand? How do I find out what model my faucet is? It is about 5 years old. Thanks.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Jan 11, 2010, 06:52 PM

    Is the thing that you are calling the wand the part that the water mormally comes out of when you turn the faucet on? If so this part that you are asking about can be reploaced . It is called the areator and can be bought at any hardware store. Take your old one with you because they come in different kinds.
    floridafan's Avatar
    floridafan Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 12, 2010, 06:29 AM
    That's exactly what I was referring to. So the part that screws out is called the aerator? That seems easy enough. Thanks for the help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

After shutting off the main line to fix a faucet, another faucet started running slow [ 3 Answers ]

I shut off the main line to fix the tub faucet. When I turned the main line back on the sink, in the same bathroom, had low water pressure. This wasn't the case prior to the job. It's very cold now so I thought perhaps a water line was frozen, however, every other faucet in the house is running...

Water suppressor needed on lavatory faucet and shower faucet? [ 1 Answers ]

Are water suppressors needed in the bathroom sink faucet and the shower stub out also? And can you just use a length of pipe on a T, or must you use those copper chambers? (cpvc system) thanks

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...

View more questions Search