Ask Experts Questions for FREE Help !
Ask
    samtoyou's Avatar
    samtoyou Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2010, 10:22 PM
    Hampton Bay fan remote control
    Can a single Hampton Bay Fan with light kit be controlled by two in-wall remote controls placed at opposite ends of a large room? Part 191-707.
    Danny Braz's Avatar
    Danny Braz Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jan 19, 2010, 03:33 AM
    Hi, I live in Brazil and I have a Hampton Bay celling fan thast I don´t know the model. It is white, 5 blades with light for the top and for down.
    There is a remote control that check temperature etc. The proble is: always when I start the fan, the highest speed shown on the control is NOT high, it happens tbat the medium speed to be the higher. Is this a problem on the remote control or at the fan. What is the spare part I need to fix it?
    Also how can I order the upper glass?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jan 27, 2010, 01:47 AM

    Sam, yes but you will have to contact the manufacturer of the controls as to how they are wired. In some cases you wire them in series. In other cases, parallel. If they are not "remote" controls than they may be three-way and wired as such.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jan 27, 2010, 01:48 AM
    Danny, you probably need a receiver. Contact Hampton Bay. They can get the glass too.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Remote Video/fan Remote Control [ 16 Answers ]

I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...

Hampton bay fan remote control [ 4 Answers ]

What is the best way to trouble shoot the remote / rcvr on the fan? 1997 vintage, led on remote lights up, fan and light do not respond, other lights on the same Ckt, operated by switch work so the ckt is alive.

Hampton Bay fan remote control [ 11 Answers ]

I installed a remote control Hampton Bay fan about 7 years ago. Suddenly, the remote no longer controls the fan or light. I have replaced the battery. I know there is a switch setting in the fan somewhere, but can't find it. Any ideas on how to get a replacement remote, or get the two synced up...

Hampton Bay fan remote control [ 9 Answers ]

Can anyone supply the pinout for the Molex connector in a Model UC7051R remote control receiver? Or just the pins for 110 volt AC power?

Hampton Bay Remote Control Fan? [ 1 Answers ]

My remote control has a button on it that says "REVERSE", but I no longer have the instructions and I don't know I there is some proper sequence to use to reverse the direction the fan spins.

View more questions Search