Ask Experts Questions for FREE Help !
Ask
    cathk's Avatar
    cathk Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2010, 04:57 PM
    Having hard time getting out old ballcock to replace with a new one
    Replacing ballcock in one piece toilet tank a kolher model 4530 can't seem to get the old part unscrewed
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 10, 2010, 05:11 PM

    The tank sets low to the angle stop.
    First remove the supply from the angle stop. That should give you room enough to get a pair of pliers around the nut holding the ball cock. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace existing hard drive with upgrade to larger hard drive? [ 6 Answers ]

How do you replace existing hard drive for a larger one and how to save info on existing device?

Disk utility error! Replace hard drive! [ 1 Answers ]

when my mac crash on me the other day it took me all night to install mac os x. when it got install without errors. I ran the disk utility app. When it was checking my hard drive it give me a error. could not fix replace hard drive. (something like that) that was 6 days ago. And now when I ran the...

Hard to replace Rheem Criterion Inducer Motor? [ 1 Answers ]

I found the part #66847 Inducer motor ($200) for my 1992 Rheem Criterion RGDG... The ball bearings were going bad and HVAC companies want from $500 to $890 to replace it. Is it hard or anything tricky about replacing it yourself? I can order the part and try it myself or order the part and have...

Replace hard drive [ 1 Answers ]

I have an 80 gigabhyte hard drive. I would like to replace this drive with a larger drive. The drive that I replace will be used as a external & portable drive to connect to a usb. Is It possible? will It be difficult??

View more questions Search