Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    little lenny's Avatar
    little lenny Posts: 14, Reputation: 1
    New Member
    		  
    #21

    Jan 10, 2010, 04:18 PM

    Its telling me upload failed
    little lenny's Avatar
    little lenny Posts: 14, Reputation: 1
    New Member
    		  
    #22

    Jan 10, 2010, 04:21 PM
    This sucks, but I really appreciate your help I will keep trying
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #23

    Jan 10, 2010, 04:24 PM
    The only way I know to do pics is to go advanced then use the paper clip to take the jpg off your computer and then up load.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace HSI does not glow, burners never light [ 3 Answers ]

I have a Goodman gas-forced air furnace, about 10 years old. I have power to the main control panel (part# 18099-13) and gas is "on". In the furnace sequence posted by sticky, I am having problems at the step where the hot surface ignitor "glows" to light the burners. All other steps, such as the...

My furnace won't light diagnostic light is green, & yhe thermostat says heat is on [ 1 Answers ]

Any ideas what's wrong it's a coleman mobile home furnace

Furnace won't light [ 2 Answers ]

Have a very old model MAC 1165 intertherm gas furnace.The pilot is lit.Main burner will not come on.I disconnected the thermocouple and pilot stays lit. Please advise!It is cold in Texas today!

My furnace won't light and the lights on my control module won't come on [ 2 Answers ]

Ok a couple of question if you can help I have a comfortmaker furnace I believe 1999 it came on a couple of times after I bought a new transformer, board, capacitator, and ignition control module now it won't come back on What to Do! Also I wanted to know if you can tell me the difference between...

View more questions Search