Ask Experts Questions for FREE Help !
Ask
    jlinton's Avatar
    jlinton Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2010, 09:01 AM
    Gas FHW furnace won't work in switch ON position unless switched OFF then ON again
    1. Last weekend we returned home to a cold house after being gone for the weekend.

    Furnace switch in ON position
    No tripped circuit
    Pilot on

    HVAC repairman comes next morning. Figures it is the transformer and replaces it. Voltage observed on one side but not the other side. Furnace works now.

    2. 5 days later we wake up to a cold house:

    Furnace switch ON
    No tripped circuit
    Pilot on

    HVAC repairman comes. Flips on/off switch off, then on. Furnace comes on. He figures it is the damper so he sets it to always be open.

    3. Next morning we wake up to a cold house:

    Furnace switch ON
    No tripped circuit
    Pilot on
    Damper now set to "open".

    *I* flip on/off switch off, then on. Furnace comes on.

    Question: what is going on? Sounds like some safety feature that is tripping. I don't want to get this know-nothing kid back out here, want to fix it myself or tell him EXACTLY what to do... I am not even convinced the transformer was broken the first time but replacing it did get the furnace to work. It could be that whatever the root cause of the problem is, it broke the transformer.

    Any ideas are welcome.
    jlinton's Avatar
    jlinton Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Jan 10, 2010, 04:08 PM
    Anyone?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Jan 10, 2010, 04:28 PM
    Try cleaning the flame sensor.
    jlinton's Avatar
    jlinton Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Jan 10, 2010, 06:15 PM
    Will do. Where is it??
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #5

    Jan 10, 2010, 08:07 PM

    You say that the pilot is on, does that mean that you have a free standing pilot or a pilot that lights each time the thermostat calls for heat.

    Also you mention the furnace switch, which switch is this and where is it located.

    Some of the new furnaces have a lock out built into the circuit board. And any time that it locks out it has to have to power turned off and then back on, is this what you are doing when you say you turn the furnace switch off and back on.

    So tell us a little about the furnace itself. Like brand and model
    jlinton's Avatar
    jlinton Posts: 5, Reputation: 1
    New Member
    		  
    #6

    Jan 10, 2010, 08:36 PM
    Hi,
    Thx--here you go--
    Burnham series 2 model b gas
    Standing pilot light
    The switch is the one on the wall--the emergency call switch.

    And yes what you describe sounds like the problem. Do you still think so?
    jlinton's Avatar
    jlinton Posts: 5, Reputation: 1
    New Member
    		  
    #7

    Jan 10, 2010, 08:39 PM

    Btw--it is a 2003 or 4.

    What would cause the lock-out?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Open limit switch on Concord Gas Furnace [ 14 Answers ]

I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...

Gas furnace - heat doesn't work unless fan is in the on position [ 4 Answers ]

I have a gas furnace that will only work when the fan is on "ON'. I changed the thermostat, same problem. Changed the circuit board, same problem. Changed the ignition modulator, same problem. Changed the fan motor, same problem. Any ideas?

Gas Furnace Limit Switch (Testing) [ 2 Answers ]

My gas furnace doesn't fire-up although I hear clicking inside every time I attempt to toggle the switch bypassing the thermostat. Is it SAFE to short the LIMIT SWITCH to check it that's the problem. Because I remember the furnace was left for several hours running and then all of a sudden it just...

Blower would not work on AUTO position just ON position [ 9 Answers ]

I have installed new rooftop unit- electrical heating & cooling- few weeks ago. When I run the cooling everything goes fine (blower and composer) but if I run the heating; heat element will fire up but the blower will not work unless I put the fan on ON position not AUTO position, so, please, I...

Installing transfer switch at gas furnace [ 2 Answers ]

I purchased the Reliance TF201W Easy / Tran switch. I'm planning to install it so I can run my gas furnace off my generator via extension cord this winter if necessary. The installation instructions show the switch being wired into the breaker panel. My breaker panel is in a finished basement...

View more questions Search