 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Kenmore front load washer model 417. The rest I don't know. They put the tag behind the door and with the moisture and heat it wore the numbers off. Anyway, here is my problem. When you press the start button everything seems fine, you hear soleniods clicking and all, but after about 20...
My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...
Kenmore front load washer Mod.# 970-C45192-00, fills, tumble and drains only, no spin during the cycle. The display in any cyle goes to blank when it reaches the last 7 minutes beeps as complete and stops with no final spin. Is this a control board or motor speed board or other ? Thanks for...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
