Ask Experts Questions for FREE Help !
Ask
    rontn2's Avatar
    rontn2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2010, 07:49 PM
    Heil furnaces troubleshooting
    Heil furnace model PGF024K060A comes on fine runs to set temp kicks off heat, blower stays on but heat won't come back on until you shut down system
    lconger90's Avatar
    lconger90 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jan 20, 2011, 06:39 AM
    Unit fan runs constantly, exhaust fan runs constantly, gas burner will not ignite. Unit thermostat will not control fans running. I have replaced the thermostat and main control board and it still does the same thing unit still will not shut off except removing main breaker.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnaces and thermostats [ 1 Answers ]

Had my ducts cleaned now the furnace won't start. We had to re light the pilot and furnace won't start. What could the cleaners have done to de activate the furnace, thermostat??

Heil DC 90 - Pressure Switch Troubleshooting [ 2 Answers ]

So far here's what I've got - 1. Thermostat calls for heat. 2. The inducer fan blows air. 3. 24v is sent to the pressure switch. 4. The pressure switch does not close (there is no voltage on the other side). Steps I've taken - 1. Jumping the pressure switch allows the furnace to...

Joining furnaces [ 3 Answers ]

I Have Two Furnaces And Would Like To Know If I Can Connect One Furnace To The Other To Draw Heat From Front Of Building To The Rear Furnace By Using Fan Switch Only. The Front Area Is A Great Room Heated Primarily By A Wood Fireplace. I Want To Take The Heat From The Front Area And Deliever It To...

View more questions Search