Check out some similar questions!
Distance of check valve to pump in waste system
[ 31 Answers ]
Just installed a bathroom and laundry room in the basement, that was already to an in-ground tank. I have a Rigid waste pump in the waste tank. The outlet pipe goes up about 6 feet then bends to a 45 where I have a check valve and shutoff valve. Pipe goes up at a 45 another two feet and then...
Is Meyers pentair sewage ejector pump model SR1830 a quality pump?
[ 1 Answers ]
Just installed a sewage ejector pump and I'm somewhat concerned about the manufacture. Not seeing very much information about Meyer. I see Zoeller and Little Giant, so I'm wondering if I got a quality systems. Considering all that was required to get the system in I don't want to revisit this for...
Check valve fix for well pump ?
[ 1 Answers ]
I have a submersive pump well system and my check valve has gone bad. So my question is can I install a new check valve up by the bladder or do I have to pull the pump up and if that's the case then how hard a job is that to do
Sewage pump/ejector pump
[ 2 Answers ]
My sewage/ejector pump sometimes won't shut itself off. It has gradually gotten worse as time goes by. What could be causing this? Any suggestions appreciated.
Septic pump check valve
[ 1 Answers ]
My septic (effluent) pump runs about 5 times a day. This started about a week ago. I think it is my back-up valve. How do I remove and check valve? After I am finished how do I ensure that my pump is primed and working? View more questions Search
Add your answer here.
|