Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat.
[ 4 Answers ]
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
Light bulb thermostat
[ 4 Answers ]
Hello. I would like to find out how to hook up a thermostat to a 100-150W light bulb. I am going to convert an old cooler to an electrode heater. Thank you.
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Want to connect new thermostat
[ 1 Answers ]
I Have A Glowworm 24ci Combi Boiler And A Honeywell T6360b Room Thermostat .they Semed To Have Not Been Connected Before.the Origanal Thermostat Was Dameged And The Wiring Just Taped Back.at The Boiler End They Are Under The Floor But Will Reach The Boiler Ok .I Just Need To Knowe Were To Conect...
Converting mercury bulb thermostat to digital
[ 3 Answers ]
I have a TRANE XL1200 Weathertron heat pump with auxiliary heat. It is controlled by a Trane 3AAT80A1A1 mercury bulb analog thermostat. I have purchased a RiteTemp 8050C digital programmable thermostat to replace it. The analog thermostat has wired terminals marked O,R,T,G,Y,X2,B,W and F. It... View more questions Search
|