Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
MAP sensor;Mass Airflow sensor;Volume Air sensor-All Same?
[ 8 Answers ]
97 Nissan Pickup - 160,000 miles - KA24E engine -Check engine Soon Light Code reader says volume air sensor. Is this the same as a mass airflow sensor or the MAP sensor? Where is this sensor located, in the throttle body injection? Just threw a new O2 (Bosch)sensor on it, I lost that bet.. it...
Kenmore Gas dryer heats for 5 mintes and turns off, then ignitor glows and turns off
[ 0 Answers ]
When I start the dryer on any heat level and timed drying, everything turns on as usual. After 5 minutes the flames turns off and never comes back on. If I turn off the dryer and start it again, I hear a click and the igniter turns on, glows and turns off before the gas comes through, then glows...
GE furnace coil igniter glows but doesn't ignite the flames
[ 11 Answers ]
GE furnice igniter glows as it should but doesn't ignite the flames what is wrong
Carrier Weathermaker 8000 igniter never glows
[ 1 Answers ]
I have a Carrier weathermaker 8000 Product # 58ZAV050--16112 Series 160, Model 58ZaV050-12, Series 0802A72264. The unit is not working, i.e. getting hot air and I get error code 34 then after 3 tries(as it should according to manual) I get error code 14. I powered off the unit to begin...
Convection Oven fan not working but glows red hot
[ 1 Answers ]
We own a Frigidaire Gallery Convection Oven (Model # CFEF388RES1) which was purchased new in 1997. Recently the convection oven fan stopped working (spinning) but the heating element within the fan housing seems okay and burns bright red when the convection setting in engaged. Any insights or... View more questions Search
|