Ask Experts Questions for FREE Help !
Ask
    cheylynn's Avatar
    cheylynn Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2010, 08:40 AM
    Heater set to desire temp and wouldn't come on.
    Thermostat set on 70, woke up cold in the house, so we raised the thermostat to 80 and it wouldn't come on. Turned off for a minute, turn back on and then it comes on.What could be my problem??
    cheylynn's Avatar
    cheylynn Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 5, 2010, 08:42 AM
    Heater set to desire temp and wouldn't come on.
    Heater will not come on automatically
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Jan 5, 2010, 09:01 AM
    It is very hard to tell when you have an intermittent problem with a no brand and no model number furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Temp set at 72 but temp won't go above 66 [ 2 Answers ]

We have a Lennox Pulse 21 furnace. Temp is set at 72 but the furnace stops once the temp reaches 66 degrees. Thermostat seems to be working. The seems to be a problem just when it is really cold (0 to 10 degrees).

My heater does not get to set temp [ 1 Answers ]

:confused: I just moved into this trailer.. it has a digital hunter thermostat I don't know how to set it the landlord tried and it shuts off before it gets to temp how do I program this thing or what do I do?? Please help me I'm freeeeeeezing

Heat not kicking on until the temp dips below 64 degrees, target temp set to 72 [ 2 Answers ]

Hello, This is my first time posting here, but I figured it was a good place to start for some advice. I just bought a new townhouse a few weeks ago and have been having some heating issues since moving in. The actual furnace (Goodman GMS 8045) was installed in June of '06 while the unit was...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

How do I keep temp from rising past set temp? [ 1 Answers ]

I have an oil heater. We have been having problems with the thermostat or heater. If we turn on the switch on the heater and leave the thermostat on the lowest setting, the 2nd floor gets very hot. The base board radiators down stairs did not get hot at all until we pushed the thermostat up, and...

View more questions Search