How far apart should biscuts be in joining wood pieces be?

splunket Posts: 1, Reputation: 1

New Member

Jan 5, 2010, 08:21 AM

How far apart should biscuts be in joining wood pieces be?

How far apart should biscuts be in joining wood pieces?

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Jan 5, 2010, 08:27 AM

Depends on the size of the boards and the application, usually about 6"

Add your answer here.

Check out some similar questions!

Removal of wood adhesive from wood subfloor [ 4 Answers ]

How do you remove wood adhesie from a subfloor? I want to install strand bamboo in a master bath. My contracter put 1/4 inch plywood over it but it crunches when you walk on it. Im afraid he tried to provide a smooth surface but didn't get rid of the initial problem-the ADHESIVE. I don't want a...

Game with wood pieces [ 1 Answers ]

What is the name of the game that has many wood pieces that you stack, then pull them out one at a time until the pile falls?

Front rim joist from multiple pieces of wood? [ 4 Answers ]

I have designed my deck as shown below 12318 With a center beam taking most of the load, and posts supporting the front rim/header (I left out the joists for clarity). I tried to indicate that I have chosen to make the front rim/header joist from 12' stock, two 11' pieces and a 6' piece, with...

Hi how do I remove wood adhesive from wood cabinetry [ 1 Answers ]

Hello, how do I remove wood adhesive from wood cabinetry. The gentleman who installed the cabinets inadvertently rubbed the glue on the cabinet itself... it looks awful.. thanks

Pieces, Pieces Everywhere! [ 1 Answers ]

Hello all! I have a FeatherLite FL20 Weedeater. Yesterday I had to take it apart to unbind the pull start cord. I have never taken a weedeater apart. After the 157 screws to get the plastic cover parts off, I slid the engine off the shaft. When it cleared the shaft, a metal pin of some sort fell...