Ask Experts Questions for FREE Help !
Ask
    hazmae's Avatar
    hazmae Posts: 3, Reputation: 1
    New Member
     
    #1

    Jan 5, 2010, 06:41 AM
    Our sewer vent has been freezing up. We have tried cutting it shorter and wrapping h
    We live in a log home in Northern MN. Our sewer vent pipe freezes over regularly. We have cut it shorter, as short as we can without it regularly getting covered with snow, and wrapped heating tape around it in the attic up to the roofline. My husband wants to put what he calls a "gooseneck" pvc top on it. I assume so it will curve over and down preventing snow from getting in it. I think the warm air will hit the top and form ice anyway. I would like to put a cover of some kind on. Not blocking the airflow but a little tent. We have been struggling with this for over a decade and I am really tired of waking up with headaches. I know it can be a very dangerous situation.
    What do you think?
    Haz
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jan 5, 2010, 07:28 AM
    Sounds like a Arctic Vent,(see image) is just what you need. Check them out at '; Water Line Heat Trace Freeze Protection For Cottage, Home, Commercial Water Pipe Applications - Arctic Vent
    Good luck, Tom
    Attached Images
     
    hazmae's Avatar
    hazmae Posts: 3, Reputation: 1
    New Member
     
    #3

    Jan 5, 2010, 07:39 AM

    Thanks. That looks like an option. Which of the two that I asked about do you think we could try, or do you think neither would be worth the effort?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Jan 5, 2010, 07:52 AM
    Quote Originally Posted by ;
    I would like to put a cover of some kind on. Not blocking the airflow but a little tent.
    You're talking about a vent cap,(see image) Most plumbing shops should carry them. If you install a Arctic Vent plus a vent cap plus all the other stuff you've done that you've just about covered all bases. Good luck and stay warm, Tom
    Attached Images
     
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #5

    Jan 5, 2010, 08:20 AM

    In addition to Tom's excellent advice...

    Less expensive option I have found helpful in your situation is to take an electric blanket, wrap it around the pipe in the attic, secure it with tape. Plug it in at low setting. Put it on timer. Leave it ON through out the winter.
    hazmae's Avatar
    hazmae Posts: 3, Reputation: 1
    New Member
     
    #6

    Jan 5, 2010, 08:35 AM

    Thank you Tom
    Milo, we have heat tape around the pipe in the attic. It's helped but not eliminated the problem. Thanks all
    HAZ
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #7

    Jan 5, 2010, 08:36 AM

    I don't know if heat tape generates enough heat to keep it from freezing...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power vent hot water tank cutting out [ 2 Answers ]

After usage of hot water, blower comes on, ignitor ignites but no gas released to heat hot water. Why? This is a Rheem Power Vent.

Cutting into clay sewer piping [ 1 Answers ]

Hello, We are experiencing root problems in our main drain line. I dug up the stretch of pipe that has the worst root intrusion so I can install a 2 way clean-out in order to snake both directions if we have any further problems. Right now my run to the street is like 150' so I don't want to dig...

Danger of methane gas explosion while cutting metal vent pipe [ 3 Answers ]

I need to cut into a metal vent pipe in order to insert a tee and create a drain for a washing machine hoop-up. I am wondering if there is a danger in using a reciprocating saw (sawsall) to cut the pipe, a danger as in "explosion"! Are there alternatives to cutting the pip in a very limited space...

Freezing/icing at outside vent [ 8 Answers ]

I have a plus 90 bryant furnace, vented out on north side of home, installed about 4 or 5 years old, when temp gets down around zero and some wind, usually, the vent will ice up and furnace will not come on? When I take vent cover in and thaw the ice off it, then furnace will come on?

Cutting a Cast Iron Drain / Vent Pipe [ 2 Answers ]

I have a 4 inch Cast Iron Drain pipe that is in the wall and runs into the floor in the basement. It has 2 toilets and a sink and shower that drain into it. I need to replace the pipe with PVC. It is from just above the basement floor (built into a side wall) and runs all the way through the...


View more questions Search