Ask Experts Questions for FREE Help !
Ask
    IJR's Avatar
    IJR Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2010, 08:32 PM
    Toilet flange
    I removed the toilet and installed vinyl flooring in the bathroom. The flange is flush with the new flooring. I was advised by Home Depot to get a riser and the Fluidmaster (35B) Wax Extender Kit.

    Do you think that the Wax Extender Kit will be enough for a good seal without the riser?

    Thanks,
    IJR
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 3, 2010, 08:45 PM

    Flush with the floor is fine, do not need a spacer. Some HD guys know what they are talking about, your guy is not one of them
    IJR's Avatar
    IJR Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 4, 2010, 12:14 PM

    Thank you! This has made my life simpler.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet flange to far from wall [ 5 Answers ]

I am renovating an old bathroom. I replaced the old toilet and after install the toilet is about 4" away from wall. Are the drains at the bottom of toilets different dimmentions or are they all just pretty standard? The flange off the wall is 14" to center

How toreplace a toilet flange [ 2 Answers ]

My toilet flange is level to the tiles.. that's not good. It has become a problem because it is leaking into the next room. How do I replace that?

Toilet Flange issues [ 2 Answers ]

From the reading I have done I believe the way I need to go is a compression flange. My home is about 36 years old and I believe that I have cast iron waste pipes. My issue is that the concrete is decayed around the waste pipe and I am wondering if I need to secure this to the slab? If I have...

Replace toilet flange [ 7 Answers ]

I'm replacing the tile floor in a bathroom. It appears the backer board goes under the toilet flange. The flange itself is PVC and the slots (for the screws that hold the toilet inplace) are both broke. How do you replace the flange? Do you have to cut the pipe and re-glue a new flange on or...

Replace toilet flange [ 2 Answers ]

I would like to know how to remove old toilet flange(PVC). The old flange is rusted and broke. I just had a new ceramic floor installed and do not want to damage it. I tried to buy a replacement ring that just bolts over the old flange but the placement of the mounting bolts would over lap onto...

View more questions Search