Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Error code for "open pressure switch" on York natural gas furnace
[ 6 Answers ]
I get three red flashes from the furnace after an attempt sequence when the t-stat calls for heat. The motor starts, and seems to try to light but after about thirty seconds, it quits and gives the error code. I have removed both gray tubes from the pressure switch and made sure they are...
Intertherm furnace pressure switch connections
[ 4 Answers ]
Hi, I have a ~5yr old intertherm furnace whose lights indicate 'pressure switch stuck open'. I checked the hoses for blockage, and in doing so, can't be sure which hose went where.. (silly me).One hose, as you may know goes to the inducer through the backplate, and the other splits to the Gas valve...
Intertherm furnace pressure switch not working
[ 3 Answers ]
Hi I have a intertherm furnace it is 2 years oid.The light on the panel is blinking twice.Wich says pressure switch open.HOw do I solve thise problem and get my furnace to work again.THANK YOU
Pressure switch stuck open on a tempstar furnace?
[ 0 Answers ]
I have a Tempstar furnace that's reading a/an open pressure switch code. How do I correct this issue?
Pressure switch stuck open gibson furnace
[ 3 Answers ]
I have a gibson forced hot air furnace and a have a code that is telling me that the pressure switch is open. If I drain the water out of it it will run for a short period.. Do you think I need a new pressure switch or do I have a drainage line clogged. Model number KG6R060C-12a View more questions Search
|