 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman heater problems
The fan works and I can smell a small amount of gas but the furnace will not light. I have turned off all power and then the switch on the igniter and turned back on power and igniter switch with no change.
Can anyone suggest a solution.. . The house dropped to 40 last night!! |
||||
|
||||
|
Goodman has made 3,337 different furnaces over the years. If you really need help I would figure you would post the EXACT model number since my crystal ball is broken.
OR see this link https://www.askmehelpdesk.com/heatin...00-284131.html |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Goodman GMP075-3 Gas heater the blower comes on and I smell gas but unit won't light
My heater starts to blow air only, when the pilot turns on and the flames start to burn it the flames turn off right away. It does it over and over again it never warms up the house. What can this be?
I have a Goodman GMP100-4 Heater. It was working fine and now it will not ignite. When I move the thermostat to a higher temperature I can hear the exhaust come on but that is it. I was told that possibly the ignitor went out. Can anyone help? Thanks
My heater kicks on for about 15 seconds then turns off and the fan runs indefinitely, after a while the heater will kick on again and the same thing repeats. Meanwhile cool air from the fan is blowing in the house and the temp on the thermostate gets lower and lower. I've tried turning off the...
We have a Goodman Heater, GMT Series, that recently started to sound like it is struggling to turn on. The LED blinks three times when it is struggling and the panel says that according to the blinking, we should check venter pressure switch or vent blockage. It was eventually starting and would...
View more questions Search
|
