Ask Experts Questions for FREE Help !
Ask
    salemmass's Avatar
    salemmass Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2009, 05:13 PM
    Toro 421. Right auger won't throw
    Old toro 421. Right auger won't throw, spins freely. Left auger throws.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jan 1, 2010, 11:17 AM

    Hi,
    Replace the shear pin that holds that side to the shaft. Possibly it is the 321-10 capscrew.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snow blower won't throw snow impeller works auger works new belt pushes up the chute [ 11 Answers ]

The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Wiring for auger switch [ 3 Answers ]

I recently purchase a replacement switch for an electric sewer auger model k-38 I wired it exactly the same way the other one was, however upon connecting the machine to the power source the machine turned automatically on without activating the switch.. does any one have a wiring schematic for...

7.5 Toro Snowblower will not throw snow, but machine runs fine [ 2 Answers ]

Hi, My 7.5 HP Toro snowblower runs great, but here is the problem. The auger appears to spin fine until it hits the snow and it stops spinning and gets clogged up with snow. I am not sure if I have to replace a belt or something? If anybody knows what the issue may be and knows if this is...

Stuck Auger [ 2 Answers ]

I snaked a bathtub drain with auger, And now the cable won't come out As it seems to be snagged by a Spring-loaded check valve just inside the tub. How do I extricate cable?

Auger Diagram for two stage [ 2 Answers ]

I have a Sears Craftsman Eager1 Snowblower (2 stage) and I can't figure out how to put the auger belt on. I have a 38" belt which by the model number (536 90570) is correct. The guy I bought the blower from put an 8 horse on the machine instead of the 7 horse which was on it originally (I think)....

View more questions Search