Ask Experts Questions for FREE Help !
Ask
    oinkerbell's Avatar
    oinkerbell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2009, 08:02 PM
    Coleman forced air heater problem
    I have a Coleman Forced Air Type Furnace. The model is #BGU09516. It is not working. I replaced the motor and it still does not work; maybe it's a connection problem. It still blows out cold air when it's turned on, but it does not provide heat. I was wondering what some solutions might be to fix this problem. Perhaps it is something with the ignition? Could you tell me where the ignition is, so I can check?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 29, 2009, 08:23 PM
    Check the status light for blinking. List of fault codes & suggestions can usually be found inside blower area.
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Problem gas forced air heater [ 3 Answers ]

When I turn thermostat on it clicks, but no heat. My son turned just the fan on it works, he opened door to heater said the pilot light is ignited and first time the burners came on. They then went out and then wouldn't come back on.

Forced Air Fan Heater [ 1 Answers ]

I have just bought a Dimplex Forced Air Fan heater and want to connect it to the wall where an baseboard heater was. The Forced Air Fan heater has three wires... Red, Black, and then a Blue wire. The wires from the wall are Red, Black and then what appears to be a ground wire. I also have a...

Day & Night forced air heater keeps blowing cold air [ 1 Answers ]

Yesterday my heater was working as normal. Today I replaced the filter in my Day & Night forced air heater. Later I bumped my thermostat when walking by it, but I'm not certain that this caused the problem. My heater turned on and blew hot air. I turned it all the way down, but the fan...

Forced air heater [ 1 Answers ]

Blows 3 amp fuse. After fuse blows fan comes on. Ignitor works prior to fuse blowing but no gas. One resistor on board appears to have black mark.

View more questions Search