Ask Experts Questions for FREE Help !
Ask
    Sandra Wood's Avatar
    Sandra Wood Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2009, 09:39 AM
    Our furnace fan seems out of sync with the furnace.
    The pilot light on our furnace went out this morning and would not relight. We changed the thermal coupler. Now it is lit, but the fan kicks on with the furnace is not working and off when the furnace starts working.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 29, 2009, 06:18 PM

    Brand/model #? So many possibilities... too many.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...

Wiring inline duct fan to furnace fan goodman gmp100-4 [ 2 Answers ]

How do I wire my inline duct fan to my Goodman model gmp100-4 gas furnace fan so that the inline duct fan comes on and off when the furnace fan does? I understand that I need a relay from the inline duct fan but don't know where to connect the relay to the furnace.

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

Furnace fan [ 2 Answers ]

I have a forced-air gas furnace w/o AC and a simple dial-type heat-only thermostat.  How do I change my system so that I can manually operate the furnace fan when not calling for heat? Merlyn

View more questions Search