Ask Experts Questions for FREE Help !
Ask
    gec's Avatar
    gec Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2009, 02:49 PM
    Snow blowers, carborators
    I have a sears craftsman model # 247.883550 w/ Tecumseh 4cycle engine, Engine model # LH1955sp aprox 2 yrs old. Unfortunately I left old gas in tank. At first it would not start @ all. Took off carb, cleaned it, cleaned spark plug and now it only runs for a short period. My biggest problem is where does the govenor link go back on. There are 2 holes in the govenor lever and several holes in the piece atached to the carborator.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Dec 28, 2009, 09:53 PM

    Hi,
    Though I have never heard of that engine number a manual is here:
    http://www.smallenginesuppliers.com/...nformation.pdf
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snow thrower not throwing snow [ 10 Answers ]

Hi everyone, I need help, I have a murray snow blower, it runs, but snow stuck in chute and won't throw out, changed the belt , no luck, hope someone can help, thanks

Snow thrower doesn't throw snow [ 8 Answers ]

Hello, I'm new but I really enjoyed all the questions I have read so far. My spirit snow blower does not all the time throw snow. Sometimes it does throw snow and all of a sudden it stop to throw snow. There is no clog in the chute. Could any one help me please, the snow is now on the ground and...

Sears troubleshooting snow blowers [ 1 Answers ]

My BRAND NEW snow blower starts first pull runs 5 minutes and dies . And will not start again for 15 minutes or so What can be wrong?

Snow blower not picking up snow [ 2 Answers ]

I have a Noma 5.0 HP snow blower that is not working correctly. The shears are not turning and picking up the snow. I've checked the shear pins, but they seem to be in good condition. What else should I check? Thanks

Snow thrower not throwing snow?! [ 1 Answers ]

The other day I shear one of the shear pins on my snow thrower tines I had replaced but the tines are not moving at all. (I hit a cement step while clearing the snow of a neighboard's driveway) Could some one let me know where I should start looking at? I don't want to disassemble more than I don't...

View more questions Search