Ask Experts Questions for FREE Help !
Ask
    lizsleep's Avatar
    lizsleep Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2009, 07:59 PM
    Want to stop the programming and just turn on the furnace
    We have just arrived at the cottage and it is freezing , we do not know how to program the noma theremestat and just want the furnace on
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 27, 2009, 08:08 PM

    Go here. UPM Marketing Inc. -Programmable Thermostats Does it look like any of these?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

In sink erator pro17 won't stop spinning after turn on [ 15 Answers ]

The insink erator pro17 which is turn on and off by turning the drain cap suddently won't turn off. No matter how I turn the cap two days ago. I ended up have to turn off the whole house power. Now I can not use the disposal. Do any one know what is going wrong and how to fix it? I can turn it on...

Furnace blower will not stop after flame goes out on gas furnace [ 1 Answers ]

Furnace blower will not stop after flame goes out on a gas furnace

Heater does not turn on and blower fan does not stop [ 4 Answers ]

Hello, I Heating unit is actinf weird today. This morning when I woke up, the fan was on and did not turn off. I check the air temperature and it was coming out cold. I noticed the thermostat was reporting 64 degrees when I usually keep it on hold at 71. I set the thermostat to Off but the fan...

Chromotherm III will not stop showing temp as 32 and will not turn on. [ 1 Answers ]

We have a Chromotherm III. When I got home today the thermostat was completely dead, so I replaced the batteries. Now is shows the temp is 32 and will not kick on the A/C. Any suggestions?

1989 Chevy pickup turn/stop lights [ 2 Answers ]

I own a 1989 chevy pickup extended cab, and have been having trouble with my right side panel of lights in the back of the truck, I replaced the panel and it worked fine for about 2 months, now when I disassemble and disengage the pigtail connector it will work fine until I step on the brakes and...

View more questions Search