Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hdp plastic pipe
[ 0 Answers ]
How do you connect hdp plastic pipes ? Do they have flanges ?
Mixing abs plastic pipe with schedule 40 plastic pipe
[ 1 Answers ]
I need to add a drain and there is existing schedule 40 plastic pipe, can I cement abs plastic pipe to the schedule 40 using multi purpose cement?
Plastic Pipe Weld
[ 1 Answers ]
I have a 33mm push on 90 Deg joint from my hand basin under the floor boards, which recently came off and flooded the kitchen. Am I OK to replace the joint with a weld joint using the existing waste pipe or would I need to replace the pipes too? Thanks.
Attaching properly gas flex pipe to gas pipe and gas stove
[ 5 Answers ]
How do I properly attach the flex pipe to the gas stove on one end and the supply pipe on the other end? Do I need a gas poxy? If so what is the proper method of application--on both sides of the attachments (flex pipe and gas supply pipe/stove) or on just one, how much is enough? How tight do I...
Natural gas pipe in bsmt is touching gas pipe
[ 2 Answers ]
I just bought a house and in the basement the single wall furnace flue is touching the dark iron natural gas pipe, just before it enters the brick chimney , the water heater also has single wall flue that runs through wood structure. The previous owner put coffee cans around the flue, he cut off... View more questions Search
|