Ask Experts Questions for FREE Help !
Ask
    pusher41's Avatar
    pusher41 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 25, 2009, 05:09 PM
    Ford 7.3 diesel problems
    I have a 2000 7.3 powerstroke. It starts fine but when it warms up it dies. Any suggestions? Code 407 is coming up
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 25, 2009, 06:15 PM

    P0407--EGR Sensor B Circuit Low Input.

    Check the EGR Valve--it may need replacing. Failure is more prevalent on trucks not using full-synthetic HDDO. Replacement can be somewhat expensive, so have it fully diagnosed by an experienced diesel mechanic. Not a common problem on 7.3L PSDs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ford 7.3 l diesel problems [ 2 Answers ]

1997 ford F-250 7.3 l diesel. Starts up then runs rough/lopes. Fault code P1211 now. IPR has been changed(oe parts). Seems ipr cannot control pressure.

6.0 ford diesel problems [ 10 Answers ]

I have a 05 f-250 with a 6.0 turbo diesel. The problemis when I first start the truck misses and will not move under it own power. After running for a few minute it runs fine with no lost of power. A napa dealer think it`s the injector leaking. Anybody else with tis problem...

Ford diesel problems [ 1 Answers ]

I have a 96 powerstroke and as time has passed over the last couple months it acts as if the batteries are going dead, but they are fully charged. Yesterday I drove it across town and when I tried to start it, it acted like it needed to be jump off but it cranked with a little raddle, made it home...

Ford 6.0 diesel problems [ 1 Answers ]

I have to keep my truck pluged in all year or it doesn't have any power,if I leave it sit all day I have to start it about 30 minutes before I can drive it,any ideas on what's wrong with it?

Ford 6.0 diesel problems [ 1 Answers ]

I have 2003 6.0 diesel, How do I get water out of the cylinder or cylinders?

View more questions Search