Ask Experts Questions for FREE Help !
Ask
    t-mo's Avatar
    t-mo Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2009, 07:53 AM
    Wiring for a T104R Timer
    I am trying to install a T104R timer to my outside pool and 3 outlets
    There is 3 conduts going into the box one is from the breaker box (pool ) other two have two wires each both outlets How would the timer be hooked up .

    Thanks

    Tom
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 23, 2009, 08:55 AM
    We need to know exact details of the wiring you have.

    The timer you have needs 240 volts for the timer motor, and can switch a 240 volt load.

    http://www.intermatic.com/~/media/fi...20english.ashx

    I suspect you have a 240 volt pump motor, which this timer can control.

    Until you give more detail, I am only guessing.

    Then you mention "outlets". This timer cannot control those outlets, as they will be served by a different circuit than the pump motor.

    Need more detail.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring intermatic T104R timer [ 6 Answers ]

Hi everybody! I work as a handyman. While trying to install an intermatic t104r timer, I found that th E clock does not work. I believe I followed the diagram. Manually It works, but I do not hear the clock ticking. Is it supposed to? ...

Wiring 240 volt timer [ 5 Answers ]

I want to install an Intermatic ET173C to serve an existing 240 volt water heater. I do not see where to land the white neutral wire -- does it go to ground along with the bare ground wire?? I checked the wiring at the heater, and the white neutral goes to the ground, along with the bare...

Wiring a timer [ 3 Answers ]

Help! I just purchased a new Pentair Whisper Flow pump and an Intermatic multipurpose control unit. I am a little confused as to how to correctly wire the pump to the control. In the wiring diagram for the control unit, it indicates a common line going directly to the pump motor. Is the common line...

Wiring bathroom fan timer [ 2 Answers ]

I want to put an electronic timer on our bathroom fan. These timers apparently only come in a four wire configuration... which I am not familiar with. I have three wires, black white copper, in my wall box. I don't want to use a dial timer. Is there a way to adapt three wires to four? If not,...

Wiring a Decora Electronic Timer [ 6 Answers ]

I bought 2 Decora electronic timer switches to to replace wall switches for exhaust fans in my bathrooms. I installed the first one no problems. When I installed the second switch the exhaust fan motor just buzzes. The fan does not move. There are only two wires plus a ground so I tried...

View more questions Search