Ask Experts Questions for FREE Help !
Ask
    fassey's Avatar
    fassey Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 21, 2009, 09:20 PM
    Code 21 gas valve relay
    Is the gass valve relay a replaceable part or do I have to change the circuit board thanks

Check out some similar questions!

Code 21 gas valve relay [ 1 Answers ]

Is the gas valve relay a replaceable part or do I have to change the board thanks

Carrier Natural Gas Furnace main gas valve will not open every call for heat [ 1 Answers ]

We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:

Flexi vs. Black iron gas line to water heater gas valve [ 3 Answers ]

I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...

Connection to gas range gas line too large for gas line intake valve [ 2 Answers ]

Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy?

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.