Ask Experts Questions for FREE Help !
Ask
    WilliamC1's Avatar
    WilliamC1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 21, 2009, 06:00 AM
    Troubleshooting snowblowers
    The two cables (0ne for the augerthe other for ransmission) have simultanoeusly lost tension. Could this be indicative of a broken belt?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Dec 22, 2009, 12:39 AM

    Hi,
    I think that would be plural as it would be both belts.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting AC unit [ 1 Answers ]

Are there any things I can check before calling a pro to look at my ac unit. I just noticed that my ac won't turn on. The fan works and the thermostat is reading the correct temp. I turned off the fan and turned the temp down to try and kick the unit on. Nothing happened. Could this be a...

Condenser troubleshooting [ 3 Answers ]

I have an ducane condenser unit. And every time I turn my ac on the unit will run well for about 20 minutes to 30 minutes and then the unit fan stops but the compresser still run and humms. So I shut the unit down for 1/2 hour or so and start the unit back up and it does the same thing run for...

Mtd snowblowers [ 2 Answers ]

I have a older model mtd 10/28 and need to replace two auger belts never did before,please need info with illustrations if possible:confused:

Troubleshooting. [ 2 Answers ]

I'm trying to trouble shoot an older computer I inherited. I am completely new to PCs. At any rate it has two problems that are possibly relateed. 1. The image the monitor (I have tried 2 different working monitors) has a bunch of red (sometimes grey) vertical lines across the screen which...

Second HD troubleshooting [ 1 Answers ]

Ok, here's the skinny... Intstalled my girlfriend's HD (Maxtor DiamondMax Plus 9 80GB ATA/133 HDD) onto my computer as a 2nd HD(slave). All jumpers are set correctly, all cables are correct (not the 1st time I've done this). Everything works fine, it's detected and I do have access to it. ...

View more questions Search