Ask Experts Questions for FREE Help !
Ask
    bvc29's Avatar
    bvc29 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2009, 06:04 PM
    york diamond 80 blower works but no heat
    the blower turns on and blows cont. but the burners don't kick on the blinking red light on the box blinks 4 times = high linit switch on
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Dec 17, 2009, 08:16 PM

    Really you will have to do a better job describing the problem. If you can't, then you won't be able to do the repair either. Call a professional.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Diamond 80 heat blower cycles 20 seconds [ 9 Answers ]

Hi, I have a 1996 York Diamond 80 furnace. Everything starts up OK (thermostat fine, flue fan kicks on fine, then pilot orange glow, then click, then gas burners fire up, then main blower fan starts). This all happens in about a minute or so, but then the main fan only runs for 22 seconds, then it...

YORK DIAMOND 80 Not Staying Lit. = No Heat blowing. [ 8 Answers ]

Hey you I have a York Diamond 80 - I don't have furnace model no. but I do have the Johnson Control board's model no. G91G951ADB-1403 (part no 031-01234-000). The problem: When I try to run the furnace the combustion blower, glow coil, and the 5 ports (burners) function. However the burners...

Heat blower works ac blower won't shut off. [ 1 Answers ]

Hello, I am having trouble with my RTH230B Honeywell. I have a Gas furnace and an outdoor ac unit hooked up to a blower and the blower has a heat off cool setting on a switch on it. Our when set on heat everything works as it should. BUT as soon as I turn the blower to cool it turns on and...

York Diamond 80 Ignitor works abd blower runs but does not heat up house [ 3 Answers ]

Our basement unit York Diamond 80 runs and run with the ignitor working and the blower running but does not heat up the first floor. The unit in the attic heats the first floor fine. The exhaust vent seems to be extremely hot. Is it possible the motor that exhausts the cabon monoxide from the gas...

Blower works on A/C but not on heat or fan only [ 1 Answers ]

I have a 1997ish intertherm A/C unit, when the Air is on the blower works fine, but when I switch to heat or fan only the blower will not work? I have bought a new blower relay & capacitors. I tested the sequencers for 240 & 24 volt, everything is reading good. I am at a loss, does anyone have...

View more questions Search