Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New bathroom sink backs up halfway, quickly drains, repeat.. no overflow in this sink
[ 2 Answers ]
I just very proudly finished installing our new second floor bathroom sink drains. Two different vanities, two different walls. I ran the water steadily in both of them for 10 minutes. One works fine. The other backs up about halfway up the bowl, then suddenly quickly drains everything and...
Bubbles from lavatory overflow vent
[ 2 Answers ]
Hello, We are on the second story of a new building. Sometimes when we wash our hands, bubbles from the hand soap overflow back out of the overflow vent. I don't think this is an issue, but I have been asked numerous times why this is happening. Is this something I should be concerned...
Moldy odor from lavatory overflow drain hole
[ 3 Answers ]
After months, I finally isolated a moldy odor in my bathroom as coming from the hole in the lavatory that is supposed to keep it from overflowing. I know this because I stopped up that hole with a wad of cotton and don't smell the mold. I have put clorox into the overflow hole but it must have run...
Replacing Pop-Up Assembly in Lavatory Sink
[ 38 Answers ]
I have had trouble with rust forming around the bottom of my white porcelain sink where the drain plate is from the old pop-up assembly. I am about to replace it. Would it be best to use a chrome-plated plastic one now or a brass one to keep rust from forming again?
Lavatory sink not flat?
[ 4 Answers ]
We're replacing a lavatory sink, and it appears that the bottom of the new sink is not flat. It rocks from side to side nearly 1/8 of an inch. It's a 19" round Gerber vitreous china sink. If we spin the sink 90 deg, it still rocks from side to side (relative to the sink, that is). Is this sort... View more questions Search
|