Ask Experts Questions for FREE Help !
Ask
    brozovicb's Avatar
    brozovicb Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2009, 01:36 PM
    Luxaire troubleshooting
    Hello. I am hoping somecan can give some ideas for a fix.
    I just had a brand new Luxaire 95% + gas furnace installed in my home. Intermitantly I get the 4 red flashes error, the heat turns off and the blower stays on. Sometimes it corrects itself and fires up again while attempting to satisfy the thermostat set temp, but if room temp is already satisfied during the error code - blower never turns off and I have to go kill the breaker to reset. It mainly only happens when it is on for a long period (i.e. recovering 5 degreees or so from being off for a while ( program thermastat). Almost like it's getting too hot and kicking off , then cools and kicks back on? Anyone?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Dec 16, 2009, 02:02 PM

    Contact the company or person who installed this furnace as what you are describing should not happen if this furnace was properly installed in the first place.
    brozovicb's Avatar
    brozovicb Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 17, 2009, 08:16 AM

    Lets just say that's easier said than done. I need to try to troubleshoot myself. Anyone know what the 4 blink code means? It definitely seems like t only happens when it's on for a while and reaches too high of a temperature. Filter is brand new.
    mrfizz2222's Avatar
    mrfizz2222 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Jan 2, 2010, 07:10 PM
    Hello, I'm having the same problem with my Luxaire 95%. I just had it installed 3 month ago... I'm not sure what is causing this, but I'm going to call the person who installed it.. if any one have any idea about this problem occurring with Luxaire products?
    mrfizz2222's Avatar
    mrfizz2222 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jan 2, 2010, 07:11 PM
    Luxaire furnace error code 8
    Luxaire furnace error code 8?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #6

    Jan 2, 2010, 07:45 PM
    There is a complete diagram on the back side of the blower access door. It will tell you what the code means.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #7

    Jan 2, 2010, 07:46 PM
    There is a complete diagram on the back side of the blower access door. It will tell you what the code means.
    mrfizz2222's Avatar
    mrfizz2222 Posts: 3, Reputation: 1
    New Member
    		  
    #8

    Jan 2, 2010, 07:49 PM
    i'm getting: 8 flashes red ---- ignition lockout due to recycles
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #9

    Jan 2, 2010, 08:07 PM

    If unit was installed by a professional, they need to come back and fix the issue. If not installed by a pro, then your best bet is to have a pro into look the system over, as it probably wasn't installed or sized correctly. If the unit was installed by a pro, it would all be under warranty and wouldn't cost you a dime, but if it was installed by a non licensed person, it may cost some big bucks to fix the problem, if you can even find a pro to touch the thing.

    mrfizz2222. I think you have the right idea about calling in the installer.

    Broz, why can't you call in the installer?
    jamiep38's Avatar
    jamiep38 Posts: 1, Reputation: 1
    New Member
    		  
    #10

    Jan 16, 2011, 08:28 PM
    Mine blinks 4 times and the code for it is( open limits) I have no idea what that mean?? help please
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting luxaire heating and air [ 12 Answers ]

Our furnace will not come on all the time. When it does it makes a humming sound outside and nothing happens. We tried changing the thermostat,but, that doesn't work. If by some small chance that it does come on with warm air it won't last long. Can you give me something to try. I can't afford a...

Luxaire troubleshooting [ 3 Answers ]

Are luxaire furnice fires up than the gas shuts off and blows cold air,turnit off and on the switch on it might work right sometimes. Ireplaaced the ignighter aand it did not make any diff.

Troubleshooting Control Board of a Luxaire [ 2 Answers ]

The fuse keep blowing out in the control board

Luxaire gas furnace [ 3 Answers ]

I have a luxaire gas furnace model number G8T08012UHA11A. The igniter would not ignite so I replaced it with a norton igniter 02532625000 model 271n 0734. Still would not ignite. I can hear the gas come on and you can light it with a match. How can I test to make sure I got a good igniter and...

Luxaire air con [ 2 Answers ]

Hi, We moved into a new house and there was no instruction manual left for the old luxaire heat pump/air conditioner. We can't figure it out- it blows cold air despite being set on 21o, it sometimes runs warm then will drop to 14o and refuse to move, it has 4 remote settings, a sun, a...

View more questions Search