Ask Experts Questions for FREE Help !
Ask
    emong macalinao's Avatar
    emong macalinao Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2009, 10:55 PM
    r410a pressure gauge reading
    What is gauge reading in lo and high side pressure when using r 410
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 16, 2009, 01:20 AM
    There is no specific reading on the high and low side since it changes rapidly depending upon a specific set of conditions and those conditions are what causes the reading as you call it to change. When people ask this kind of question it is usually because they are doing something they should not be doing. If you really want to know about the refrigerant cycle I suggest signing up for a class at your local educational office since this venue cannot possibly explain all you need to know and anyone who says different has no idea what they are really talking about.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Well tank pressure gauge [ 8 Answers ]

Got a call from a friend that said when she turned on the sink faucet dirt and a little water with little pressure came out.She turned it off and called me.I asked her if she had water running somewhere that would be depleting the well.She found that a sprinkler system was running on a timer but...

Oil pressure gauge reads zero. [ 1 Answers ]

Hi I have a 1995 jeep wrangler that I just purchased. The oil pressure gauge reads 80 pounds all the time I opened the hood and noticed the eletrical plug was off the oil pressure sending unit. I reinstalled connector and now oil pressure reads zero at idle or 3000 rpm. Do you think sending unit...

Pressure gauge for tank [ 5 Answers ]

I was wondering if anyone could tell me why the psi will not drop on my pressure gauge for the tank . It will go up and stay at that and will not release. The gauge has been replaced and we also unhooked the pressure gauage and switch and let the water flush out. Thanks for any info you may have...

Oil Pressure Gauge [ 2 Answers ]

Where is the best location to install the oil pressure gauge for a "Correct" reading? A "Mechanical" gauge,sorry!

View more questions Search