Ask Experts Questions for FREE Help !
Ask
    tblcjd's Avatar
    tblcjd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2009, 08:43 PM
    Beckett furnaces how to bypass safety control
    How do I bypass the safety control in order to bleed ?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 15, 2009, 08:49 PM
    Wire pump electric motor directly to 120 volt source with a patch cord or extension cord. Make dang sure the ignition transformer and all other electric components are disconnected in the wiring area below the transformer. NOTE!! Write down how it all was wired together BEFORE disconnecting all the wires. Make sure that once all the air is gone that you can disconnect the wiring powering the pump motor quickly. You do not want a belly full of oil when you light her off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Burner safety control [ 3 Answers ]

What is a burner safety control issue? How do I go about fixing it. Thanks for any info.

Beckett AFG Burner safety tripping [ 13 Answers ]

I have a Beckett AFG burner, the furnace is power vented and has a V1 head. The burner starts up then after about 10 sec trips safety. I have replaced electrodes and nozzle, thoroughly cleaned head and air tube. Yesterday I had a service man come and adjust air using CO2 sensor and a probe to...

Remote PC control through logmein... safety issues? [ 15 Answers ]

I have the logmein software installed and ready to use but every time I use it to connect my laptop at home, I feel somewhat unsafe. How reliable is Logmein (www.logmein.com) itself? Does anyone know? Someone told me that their security certificate is 'not quite acceptable'. What other...

Bypass Hampton Bay fan remote to wall control? [ 1 Answers ]

I am adding a room addition to my house and we prewired the room for a fan wall controller. The wall controller will allow me th dim the fan lights and the recess lights all at once and the fan control to control the fan speed of course. I am in a big mess now because the fan I bought from home...

View more questions Search