Ask Experts Questions for FREE Help !
Ask
    spacechallenged's Avatar
    spacechallenged Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2009, 11:30 AM
    How are price pfister faucets rated
    How do price pfister faucets rate for reliability/ quality/ durability?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Dec 13, 2009, 11:43 AM
    Hi Spacechalleneged...

    My opinion is that Price Pfister is a good looking faucet nowadays, but they still have cheap parts inside... ;)

    If possible, I'd recommend that you consider sticking with the trade named faucets such as MOEN (least expensive), Kohler, or Grohe (most expensive). These guys have great warranties and product failure is pretty rare.

    Hope that helped some...

    MARK
    spacechallenged's Avatar
    spacechallenged Posts: 8, Reputation: 1
    New Member
    		  
    #3

    Dec 13, 2009, 01:42 PM

    Thanks so much.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Price Pfister [ 5 Answers ]

I have a Price Pfister kitchen faucet that has a plastic spray nozzle that is leaking and squirting . There is a crack in the plastic. Now all the other parts are polished chrome. Who would I contact to get this replaced? Or get a replacement part? The dang thing is less than 5 years...

Price Pfister 533 [ 2 Answers ]

I have a Price Pfister 533 with a leak. I have taken off the handle but I can't figure out what to unscrew/take off next. The Price Pfister site is down!

Old Price Pfister parts [ 3 Answers ]

I have an old bathroom shower/tub faucet that needs some parts. How do I identify the parts. I have pictures. I need the cartridge and handle. Doe anyone know of a website or place that specializes in older model parts? This faucet is at least 30 years old - Price Pfister. Thanks Greg

Price pfister [ 2 Answers ]

Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper

View more questions Search