Ask Experts Questions for FREE Help !
Ask
    robert1953's Avatar
    robert1953 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2006, 09:48 PM
    Wiper switch
    My wipers will not stop when the switch is in the off position. I think that the switch is not working properly. How do I find a assembly diagram for a 2000 Honda Civic or how can I fix fix it?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Nov 26, 2006, 01:06 PM
    Honda Civic Wiper/Washer Switch Replacement

    1. Remove the dashboard lower cover.
    2. Remove the steering column covers.
    3. Disconnect the 8-P and 6-P connectors, then remove wipers/washers switch.
    4. Install new switch in the reverse order of removal.


    Try spraying the old switch first with WD-40.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Converting pull switch lights to wall switch [ 3 Answers ]

I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...

Windshield Wiper Problem [ 2 Answers ]

My windshiel wipers on my 2003 Honda Accord quit working all of a sudden the other day. I checked the fuse on the box next to the drivers seat and it was good. Any suggestions?

Windscreen wiper needed for Alfa Romeo 156 [ 2 Answers ]

Looking to buy second-hand a complete windscreen wiper arm for Alfa Romeo 156 (2004 Model). Based in Ireland.

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search