Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter fan wiring model 26107 light fixture wiring sequence
[ 2 Answers ]
There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?
Ceiling fan wiring
[ 2 Answers ]
I have an interesting situation. I have replaced the ceiling fan in a bedroom and want to use a double switch to control the fan and light. The single switch that I am replacing only controlled the light. The preexisting wiring has 7 wires in the box. A 12/2 and a 12/3 - 2 blacks, 2 whites, 1 red...
How do I get separate switches for my ceiling fan/light
[ 9 Answers ]
I would like to install separate switches to my ceiling fan/light. I have power coming into the switchbox and one 14-3 going up to the fan/light. Can I do it with this setup? Thanks
Wiring a ceiling fan with lights between 3 way switches
[ 4 Answers ]
How do I,wiring a ceiling fan with lights between two 3-way switches
Light bulb in ceiling fan not working
[ 3 Answers ]
We have a ceiling fan with a light fixture in a bedroom, I think it is a Hunter fan. There was a shorting noise and the light no longer worked. I replaced the pull switch because that has happened before. When that did not work, I what the bulb mounts into. That also did not work. I tested the... View more questions Search
|