Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing Honeywell HM506H8908 TrueSTEAM Humidifier 6 Gal Manual
[ 1 Answers ]
Hello I did installed the unit but it give me call service and when I do rest it blinks 7 times . All dip sitting are off I want the humidifier to run when the heat is on only I hooked up wire R from the humidfier to TR on the furnace I hooked up wire C from the humidfier to TH on the furnace...
Honeywell HE360 Humidifier Is Not Working
[ 3 Answers ]
I recently installed two Honeywell HE360 humidifiers. One above each furnace in a dual zone system. Everything seems to be working like it should, but the humidity in the house isn't going up. The units are installed on the discharge of each furnace, and are piped to cold water. The water...
Honeywell humidifier
[ 3 Answers ]
I have a Honeywell HE220A flow through humidifier on my forced air furnace. It is not near a drain so the drain water is collected in a large pail then emptied periodically. Is it normal to have 5gal+ in a days operation? That seems excessive but I don't have much experience with these units (I...
Furnace 3 amp fuse blows after install of honeywell HE360 humidifier
[ 4 Answers ]
My wife's uncle installed a new honeywell HE360 humidifier and now the 3 amp fuse keeps blowing? I had a humidifier before and just installed a new onewhat could be the problem? Please help Thank you Larry
Wire Honeywell Humidifier
[ 2 Answers ]
I have an HE360A humidifier, an h8908b manual humidistat and a two stage Trane Furnace. The Furnace already has a 120 to 24v transformer wired to the furmace, which is how the old April air humidifier was wired. There are two yellow wires coming out of the water inlet solenoid on the... View more questions Search
|