Ask Experts Questions for FREE Help !
Ask
    majerusw's Avatar
    majerusw Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 9, 2009, 11:16 AM
    Casablanca fan switch
    I have Casablanca fan/light, with a 4-button switch. Power and fan buttons work, but not the light button. Is the switch bad, or is the circuit board bad. How to tell?

    Will
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Dec 10, 2009, 10:04 AM

    Start by testing the bulb in another fixture to insure its good, back to you
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Dec 11, 2009, 11:24 AM

    There is no clear way to tell other than replacing either the switch or the circuit board in the fan. These parts aren't cheap.

    Some older models have a separate light module circuit board at the bottom of the fan.

    I agree with checking the bulbs and wiring first.

    Casablanca Ceiling Fans - Reviews and ceiling fans on sale at Ceiling Fan Brands
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fan center reset switch [ 1 Answers ]

My sisters furnace keeps popping the red reset button on her oil furnace. I believe it is an ignition control center. I replaced it a few weeks ago because it would not reset. The furnace will work fine for like 2-3 days then pop the reset button. Some days it needs to be reset 2-3 times a day....

Light bulb size for a multi-speed four light five blade Casablanca Fan [ 2 Answers ]

I had a Casablanca ceiling fan (5 blades/4 lights) installed in the late 1970s or 1980s. It's still going great, but I am uncertain whether it can take more than 40 watt light bulbs. I would like to generate more light and am wondering if I can install 60 watt light bulbs in this fixture? Does...

3-speed fan switch [ 2 Answers ]

Wires were take off before by someone that lived here be4 so I want 2 fix the fan and I don't know where the wiers go and the packaging doesn't have it and I don't want 2 mess yhe fan up.:)

Casablanca Fan switch replacement [ 3 Answers ]

I really hope someone can help me.. I have a casablanca fan the pull switch stopped working so I went to Home Depot to buy a replacement.. I installed the wire exactly how they came out.. now it runs on only hi speed. I have a black wire, yellow, pink & grey. I returned the switch and tried...

3 speed Casablanca switch (4 wires) [ 2 Answers ]

[I replaced the chin switch for my fan and it runs slower than before. It has 4 wire that is attached to the switch.( blue green black & yellow) Do I have the wires in the worng sequence? Or just get a new switch?:confused:

View more questions Search