Phase angle for beginners

ivanmn Posts: 1, Reputation: 1

New Member

Dec 9, 2009, 08:41 AM

Phase angle for beginners

Phase to phase relation, + & - sequence

Alty Posts: 28,317, Reputation: 5972

Pets Expert

Dec 9, 2009, 08:43 AM

Is this homework?

Please see this link;

https://www.askmehelpdesk.com/langua...-b-u-font.html

Add your answer here.

Check out some similar questions!

What's more energy efficient single phase or 3 phase and what's harder on the equip? [ 18 Answers ]

Hello, I would like some advice from anyone willing to offer. I'm starting an ice cream business and I'm collecting used soft serve machines. Apparently, there are used machines configured for single phase and 3 phase 208V 240V etc... I would like to know which phase a voltage is more economical...

How does the phase angle varies from place to place [ 3 Answers ]

I mean why does the phase angle varies on the transmission line even if we don't tap power in between those points...

How do you usually connect three single phase loads to a three phase generator? [ 2 Answers ]

How do you usually connect three single phase loads to a three phase electric generator?:)

How to go from 200Amps/208V/3 phase to 600Amps/480V/3 phase [ 2 Answers ]

I am starting a business and have equipment that requires 600Amps/480V/3 phase, but the site I want to rent has only 200Amps/208V/3 phase. Is there anything I can do to get the required power on that site? Any equipment I can buy to achieve this goal? I understand it may be costly. Thank you.

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping