Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
B&S Model 42A707 won't start, too much compression
[ 2 Answers ]
I have a 9-year old MTD with B&S 17hp (model = 42A707, type = 2238E1, code = 8115A). Starter will turn the engine over to the compression stoke and then stop. Have tried new battery and jumping it from running automobile and same thing. Removed one of the spark plugs and it turns over fine. ...
B&S 16.5 (older model: 42a707) won't turn over w/plugs in
[ 3 Answers ]
I've searched and searched to find the following suggestions: 1. Adjust the valves (twin cyl, no ohv, not sure this engine has valve adjustments) 2. ACR broken (still trying to figure out if this has ACR or not) Note: According the B&S IPL for this engine, there is no visible adjustment for...
Spark plug doesn't spark while grounded but will if you hold it away from ground
[ 1 Answers ]
I have a Honda Z50 that I picked up at a bargain and it wasn't firing if you hold the plug on the head, I noticed if I hold the spark plug about an inch or so away from the head spark will jump from the plug to the head or what ever else you hold it next to or if you just hold it in your hand it...
Briggs 42A707 18.5 Ultra - No Spark
[ 1 Answers ]
My 18.5 hp Murray Ultra with a Briggs 42A707 mower was running fine a few months ago when I parked it in the shed. Then after 2 weeks of sitting it would't start, not even attempt to turn. I found that I wasn't getting a spark or even any power to the starter. I cleaned the ignition, replaced...
Murray Mower 42" Twin Select w/ Briggs 42a707, Solenoid just clicks
[ 2 Answers ]
Murray 42" Twin Select Briggs 42a707 16.5hp Motor OK, I am not on my mower at the moment, obviously, but I will post more model numbers and such this afternoon. History. 1. Wife picks house with monster lawn. 2. Wife pisses on my plan for a new riding mower. 3. Neighbor has pity and... View more questions Search
|