 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem furnace,fan runs all time and dosen't fire up
I have a furnace that the fan runs all the time. The thermostat doesn't turn it off or doesn't seem to control the unit. The green lights on the board are on and the orange light is not. The unit will not fire up.
I have unplugged and plugged in all connection. Didn't see any problems with the circuit board. Change the batteries in the thermostat. Is there something I'm missing. |
||||
Check out some similar questions!
How do I get my fan to run all the time on my 08 rheem prestige 90 plus gas furnace I have to modulating t stat? I turned it to run on the t stat and put dip switch 5 to the on position and still nothing?? What am I doing wrong? Robert
Hi, I have a natural gas furnace that is starting to give me grief. Often when I call for heat the motor and blower fan turn on and I get a blue induction flame, but the tubes won't ignite. At first I would turn off the furnace at the thermostat, wait for the fan to stop (which would sometimes...
Chronological Sequence of Events 1.Programmable Thermostat installed in 2007, and was working as programmed 2.New Brock Furnace installed in April of 2009. 3.Furnace has run randomly as if it has a mind of its own, since the installation 4.Sometimes the air is heated and sometimes not...
Our New Gibson Furnace blower fan and draft inducer fan started running all the time no matter if the stat is on or off even unhooked the stat and still runs. The light on the circuit board is flashing a code 1. Does anyone have any experience with these furnaces and this problem? Thank You
Everything may be fine with my system, but it seems that it is taking a very long time for the home to heat up, which results in the furnace running all the time. The natural gas furnace is struggling to even get to the 68 degrees the thermostat is set to, and the temperature is only in the 30s...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
