Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tappan Furnace Fuses
[ 0 Answers ]
I have a Tappan Furnace. I just replaced the circuit board and I am getting no power at all-no lights coming on. I do have cover replaced and I do have power on. Is there a fuse other than the circuit board fuse that might need tobe replaced? If so where do I loacate it? Thanks
Tappan model 30-2242 oven doesn't lite
[ 1 Answers ]
1. The oven ignitor was replaced a few months ago. Ignitor lites up OK. Flame doesn't come out. Gas to unit is on. Gas stove top works fine. What could be the problem? 2. Where can I find an online owner's manual for the Tappan 30-2242-00/01 range oven?
Fix or buy Tappan Range burners?
[ 2 Answers ]
On a Frigidaire, Tappan range, Mod#30-2242-00/01 ser#V52140756 See picture Part Detail The tops of the burners are loose - you can spin them on the base. Flame is coming out the gap between the top and the base and not all ports on top are emitting flame. Those that have flame are blue and...
New Tappan Furnace overheats & shuts down
[ 1 Answers ]
Tappan Furnace Problem Last season I had a Tappan furnace installed in my shore home.. during the winter I set the temp at 55 when I'm not there & when I come down I set it at 70... the furnace kicks off around 62 & I need to reset the system. The contractor has replaced the reset buttons &... View more questions Search
|