Ask Experts Questions for FREE Help !
Ask
    702heating's Avatar
    702heating Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2009, 08:24 PM
    What is the difference in the wireing of a g600ax- and a 600ax-2
    What is the difference in wireing of a g600 ax-2 ans a g600 ax-1?
    702heating's Avatar
    702heating Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 3, 2009, 08:27 PM
    The question is for G600-ax-1 and a g600 ax-2. Just wanted to make it clear.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Dec 3, 2009, 08:35 PM

    How about telling us what it is and the brand? That might help. The crystal ball is broken.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Dec 3, 2009, 11:39 PM
    I believe that is a old Johnson control number. I suggest you go to the Johnson control site and look up both of them and read the install instructions to find the exact difference if any.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring changes: Johnson Controls G600AX-1 With Honeywell S8610U Gas Ignition Control [ 7 Answers ]

This is my very first post so... Hello everyone. and here is my question: I am replacing a Johnson Controls Pilot Gas Ignition control unit with a Honeywell 8610U and I am a little confused on how to connect all the wires. The wiring on the Johnson Controls unit is as follows: Main Valve...

Honeywell g600ax-1 no gas thro to system [ 1 Answers ]

I'm not getting any gas to the line.. there is gas going into it but when I turn it on no gas goes to the ignition every once in a blue moon it will light then shut off like 1 -2 min latter I have no clue what to do I think it is the values that sitt right under I think there are not lifting or...

GFI wireing [ 2 Answers ]

I am planning on wireing basement shop outlets. Do I need to use GFI outlets? Can I use one GFI outlet in a run with non GFI outlets? How many outlets can have in a circuit? Should I use 12/2 wire with a 20 amp circuit breaker?

220 wireing [ 2 Answers ]

How many wires does 220 central air have going to the copressor unit outside

View more questions Search