Ask Experts Questions for FREE Help !
Ask
    ResourcefulRoxi's Avatar
    ResourcefulRoxi Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2009, 08:47 PM
    Socket size needed for axle nut
    2003 sunfire. The nut in front of the wheel bearing hub on the front axle. Anyone know what size socket I need? I have to get it off in order to change wheel bearing(hub), and I don't want to buy a bunch of sizes I won't ever use.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 3, 2009, 08:54 PM

    It's likely 30 mm, but it's best to use a caliper and measure it. I always keep a caliper on the top shelf of my tool chest for such purposes.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert A15 intermediate socket to A19 standard socket [ 10 Answers ]

I need more light from my Hampton Bay ceiling fan light. It has the new A15 Intermediate base bulb and does not put out enough light. Is there a fluorescent bulb available for the Intermediate base socket? Is there an adapter available for the socket that would allow me to use a Standard size...

What size AC is needed for my home? [ 3 Answers ]

My house has 1950 square feet and is a single story. The house is a Fox & Jacobs house built in the early '70s. The current A/C unit is a 3 ton and I believe it is the original unit. I live in the Dallas, TX area (Very hot in the summer). It is time to get a new unit. Should I get a 3.5 ton or a...

View more questions Search