 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I need to find a asian mfg of a toilet supply line
I want to have an Asian mfg'r make a 12" toilet supply line 3/8" compression to 7/8" pvc nut. I need the female connector to the tank to be brass or stainless steel, not plastic.
Please put me in touch with Asian mfg. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How can I fix water leaking from the area where you actually turn off the water supply behind the toilet?
Hey Guys, You all have been such a great help with my questions about our bathroom remodel. I have one final question... I hope! I am re-routing the water supply line for the toilet. The old line was galvanized steel and I am replacing it with PEX, which has been easy peasy to put together. ...
Hi all, I want to install a wall-mount toilet in my residential bathroom that is currently stripped to studs. To use a Duravit or Caroma, I would need to move the vent stack and studs to allow room for the in-wall tank, so I am exploring using a commercial toilet instead. Toto has a 1.28 gpf...
I am having difficulty connecting a new water supply line running from the toilet to the Shut off valve. The approximate distance from the toilet to shut off valve is 6 inches, but the smallest hose I can find is 9 inches. The local home center suggested I cut an ""Innoflex Connector"" to the...
Hi: My husband and I are DIY newbies. We just attempted to replace a 70 year old leaky toilet in time for 1st holiday fam visit only to incur new problems. For one, the water supply stem is leaking (right around where knob connects to the stem)! Never done this before. To boot, the tank to our...
View more questions Search
|
