Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Gravity furnace pilot is lit but burners aren't working
[ 14 Answers ]
I have two large gravity heaters - the kind with asbestos octopus ducts - in my basement. They were made by Pacific Gas Radiator Company (Huntington Park, CA). The pilot lights but the burners do not fire. I try to clean them out each year, but I have the problem repeatedly. On the other unit, the...
Pilot light won't stay on.already tried changing thermocouple
[ 7 Answers ]
I realized 2 weeks ago that there was cool air coming out of my vents when my heat was on. I then figured out that the pilot light would not stay on. I changed the thermo couple and it seemed fine. It would stay lite and the heat was working. Last night I truned the heat on and the same problem...
Rheem pilot stay lit but wong ignite gas in the chambers
[ 8 Answers ]
Rheem model rgld-1one-jr, ignitor model sp715-us17-15u. The pilot will stay lite but will not lite the gas in the gas chambers. Yesterday I turned everything off all night gas valve and t-stat when I got up ithought I would turn it on and listen for a while. So the pilot lights and the gas was...
Goodman forced air furnace
[ 4 Answers ]
I have a goodman it won't turn on when the thermostat calls but if I go down and open the front and push the button it will run until it gets to 70 degrees shuts off but won't turn back on when the house gets cool.help.
Gas water heater pilot light won't stay lit
[ 2 Answers ]
The pilot light on our State Censible gas water heater will not stay lit... it is not the thermacouple and it is protected from drafts. We light it daily... we get enough hot water for about 2 showers and a load of dishes. What could be causing this problem? View more questions Search
|