Ask Experts Questions for FREE Help !
Ask
    CAOWC87's Avatar
    CAOWC87 Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 2, 2009, 01:39 PM
    furnace placement
    My mother and I find ourselves in a mind boggling situation regarding the purchase of a combination furnace and AC unit. The home to be supplied is of Cape Cod style in Northern NJ and is approx. 1200 sq. ft. The home was built in the early 1940's and converted from coal to steam radiator. There is no heat source currently in the home and natural gas is available on the property. The old boiler was removed by my father who was in the process of remodeling the home. Unfortunately, he passed away and the responsibility of renovation is now on my mother, with my assistance. We have contacted several (5)HVAC installers and have received not only very different price quotes but varied thoughts as to placement of the unit as well -- either the attic, in a quite large storage area or the basement. In our opinion, placement in the basement would dramatically impact the resale value of the home given that the duct work would have a noticeable drop in an already low area (6'10"). The most reasonable estimates received include the Goodman & Ruud brands placed in the basement. Since the brands were unknown to either of us, we did some research and became further confused. Those brands which we thought were of good quality: York, Trane, and Carrier etc. seem to have unfavorable ratings like the Goodman and Rudd brands. We are not opposed to placement in the basement. As a matter of fact, we were leaning away from attic placement when some technicians were discussing the ineffectiveness (heat) of attic placement. Some have also indicated that the higher efficient units will condensate more in the attic and the pipes can burst. Others say there is no worry at all. We have already removed the chimney stack as it protruded into the kitchen being remodeled. Therefore, we now need to go with a direct vent system. The laundry area is located in the basement and my mother is concerned that the first floor is going to be cooler at the floor level in the winter months. What are the true drawbacks to placement of a combined unit in the attic and what is really considered a reliable brand?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 2, 2009, 02:19 PM
    Go with at least a 90% plus gas furnace. The brand really makes little or no difference it is the install that tells it all. You need to find the best company to do the job not the supposed best equipment since everyone will have a different opinion in that matter. You also need to follow the item that is attached. Just open are read then follow the instructions to make your purchase less of a headache.
    Attached Images
  1. File Type: pdf How to pick a Contractor.pdf (309.7 KB, 110 views)
  2. hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #3

    Dec 2, 2009, 02:21 PM
    All replys to be posted on this link. I edited all the others.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace Placement & Brand Selection [ 0 Answers ]

Duplicate

Toilet placement [ 6 Answers ]

I am installing drain pipes for a toilet, how far away from the stud wall should the centre of the flange be? Is it standard or does it change depending on the toilet?

Placement of AAV [ 4 Answers ]

Long story short our kitchen sink in our house needs an AAV as a result of a renovation. My question is to the exact location of the AAV downstream from the p-trap. Thank you in advance for any advice. RMH Option 1. Place it ontop of the "T" AAV L ...

Wye Placement [ 4 Answers ]

Hello All, I have a question as to the correct placement of a wye fitting. This is a 3" wye from a toilet that is draining into the main line. After installing this I realized that the wye may need to be placed more on its side, rather than almost upright. I'm imagining the water just flowing...


View more questions Search